Swapping PRI in SX2000

[DomingoDolores]

A customer has a SX2000 with a broken PRI. I have no idea what SW they are running.
Is this easy to swap with a new one? I have no idea how this is programmed (on the CPU or partially on the PRI itself?)

thanks in advance

The problem with TCPIP jokes is that when I tell them, all I want is an ACK but usually get FINs and RSTs

 

[nytalkin]

If you replacing the MC270 you will need the IMAT software to program the PRI

NO GOOD DEED GOES UNPUNISHED!

 

[LoopyLou]

PRi's on an SX2000 whether through a PRI card or an NSU will need to be programmed via the IMAT tool. Swapping a defective part is easy. Programming the part is a little more difficult.


I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.