Swapping Cards

[jk77]

One of the more simple questions I am sure.

Avaya Definity G3si.

I simply need to swap out a '8 port hybrid' card for a '8 port analog card'- same slot. My understanding is that the PBX does not need to come down.

What programming would need to be done for the card to be recognized?

 

[mikeydidit]

If you do not have any translations built against the old card, just remove it from the slot. Then place the new one in and your done. The pack has a place built into it that tells the switch "hello I am TN ???" you do not need to program it.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594