swapping an EXP200 unit

[jdeane]

I am planning on replacing my current EXP200 with another due to a number of problems I have been experiencing.

I have a 2nd unused EXP200 and would like it confirmed that all I should need to do is power down and swap the HDD's over in the same sequence and power on again. There should be no data loss.

Or is there something else I need to look out for during the swap over.

Thanks

Jonathan

 

[WIhrb]

You are correct. As long as the drives are in the same slots and you plug the cable into the same port you should be safe. As always, back up first just in case.

I have lost drives when I power them down and bring them back up.