SVP Settings 1

[bflowers]

I'm looking for the SVP settings to change the allowed "inactive time" while using EMML, before it shuts down from user inactivity. I was performing a system backup on floppy disk, and was nearly through when EMML disconnected. Very frustrating, and an hour lost.

G.W.North

 

[Fubob]

Depends on the DCU:

COMMAND
FORMAT
CHA SVP, TYPE, ID, DATA
PARAMETER
DESCRIPTIONS
TYPE: Service data table type (1 to 15):
• 1: Service timing.
• 2: Service selection flag.
• 3: Installation data.
• 4: Lamp installation data.
• 5: DCU control data (auto logoff only).
• 6: Service counter.
• 7 to 15: Spare.
ID: Service identification data (1 to 512)
DATA: Service data (0 to 261120)


Security Control Data Table (TYPE = 5)
ID Explanation
1 DCU00 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
2 DCU01 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
3 DCU02 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
4 DCU03 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
5 DCU10 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
6 DCU11 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
7 DCU12 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
8 DCU13 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
9 DCU20 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
10 DCU21 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
11 DCU22 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
12 DCU23 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
13 DCU30 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
14 DCU31 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
15 DCU32 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.
16 DCU33 Automatic logout timing
0 to 255 min. by 1 min. interval, the default value is 10 min.

 

[bflowers]

FuBob, your information did the trick. I was able to redefine the timing parameter. Thanks.