SV9500 Station to Station restriction

[RonL2]

Is there an easy way to restrict station to station calling without setting up tenat service? I have a H/M SV9500 that has one phone that needs to be sta to sta restrict.

 

[SamThePhoneMan10]

are you trying to do a hotline, when station goes off hook it can only call the designated station you specify?

 

[hcmbmt]

Use AEFR:
D/N/U

FRI 0 Station to station call without a Station/ATT assistance

FRI 1 Station to Station call with Station/ATT assistance

FRI 2 Station to Trunk route access without a Station/ATT assistance

FRI 3 Station to Trunk route with a Station/ATT assistance

FRI 4 Trunk incoming call to a station without Station/ATT assistance

RSC 1: Calling Route Restriction Class (0-15)

RSC 2: Called Route Restriction Class (0-15)

RES: restriction data – 0 Restricted ; 1 Connection is allowed

 

[SamThePhoneMan10]

Use AEFR:
D/N/U

FRI 0 Station to station call without a Station/ATT assistance

FRI 1 Station to Station call with Station/ATT assistance

FRI 2 Station to Trunk route access without a Station/ATT assistance

FRI 3 Station to Trunk route with a Station/ATT assistance

FRI 4 Trunk incoming call to a station without Station/ATT assistance

RSC 1: Calling Route Restriction Class (0-15)

RSC 2: Called Route Restriction Class (0-15)

RES: restriction data – 0 Restricted ; 1 Connection is allowed

This would only be trunked calls restricted

 

[hcmbmt]

Use FRI 0 - change to 0. I use this setting to restrict station to station call and it works.