SV9300 Multi-shelf configuration 2

[cnyamukondiwa]

Dear Colleagues,
I am seeking your assistance with the step by step procedure in configuring a multi shelf SV9300 pabx comprising of
1. 2 x 2u (ED)chassis dual CPU configuration
2. 8 x 2U chassis

My greatest challenge is in linking the first unit with the second.

Thanking you in advance.
Rgds,

Cleophas

 

[cnyamukondiwa]

Dear Colleagues,
Just to add more flesh on the problem

1.I want to link unit #1 to unit #2 and each unit with dual CPU each.
2.What will be "Sense" switch settings to unit #1 and that of Unit #2 each with 3x chassis to make it one unit like Netlink in SV9100/SV8100.
I have gone trough the Hardware manuaal it is not stated anywhere.

Thanking you in advance.

Rgds,

Cleophas

 

[PFD45]

It looks like it's covered here in chapters 12 and 13 of the System Hardware Manual.

http://files.engineering.com/getfil...-SV9300-SystemHardware-V1_Chapter_12_&_13.pdf

 

[cnyamukondiwa]

Dear Colleagues,

Thanks PFD45, I managed to get the system up.
Do I have to connect sync cables from unit 1 and unit 2?
Are there any timers I should set for system replication?

Thanking you in advance.

Best Rgds,

Cleophas

 

[PFD45]

Sorry Cleophas, I wish I could help but I have no experience with redundant CPU's on the 9300.

Anything I told you would just be me reading the book and taking a guess.

But my hat is off to you for getting it going. If I ever do this I'm going to call you!

 

[cnyamukondiwa]

Hi PFD45,

Thanks so much for all the help.

Really appreciate your efforts.

Best Rgds,

Cleophas

 

[belevedere]

The information you are looking for is in the networking manual. See attached.

 

[cnyamukondiwa]

Dear Belevere,

Thanks for all the support.
The manual that you gave a link to is for the SV9100 and not for the SV9300, I want to thank for all the efforts

Best Rgds,

Cleophas.

 

[belevedere]

Sorry, try this one.