SV8300 Console not ringing 1

[soaressteevan]

I have connected console on 8300 programmed as

1000>020116>E000

200>0>800

6000>0>0

6001>0>1

6027>0>3

620>01>0

But when i am calling "0" i can see ATND is blinking but it doesnt ring.

anyone can help me out in this issue?

thanks n regards,

 

[OzzieGeorge]

Ok

So I've never opened the manual for the 8300 since I did the course! But as the programming for general things is the same as the IPS here goes!

I'm assuming it's a 716 console so the ATND key would be 4th from the left on the top row of 10 keys (not counting the row of four above). This would be key 16 in programming and if you check Cmd 9000 it would be set to F6060. What you need to do is check Cmd 9001 for key 16 and make sure it is set to 1. Also check Cmd 9003 and make sure that is set to 1 as well. So the command strings will be...

9001 de E000,16 de 1 exe
9003 de E000,16 de 1 exe

Other than that, I'm assuming you have checked all the switch and volume settings on the console it's self!

 

[soaressteevan]

Thnaks Mr.Ozzie,
let me check on it.
I have connected console on 2nd unit(Unit02)
when i connect it on Unit 01 it works fine. but in Unit 02 it doesnt.
But manual says 8 console can be worked in one system 2 per each Unit.