Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sv8100 No Dial Tone!!

Status
Not open for further replies.

quazimotto

Programmer
Mar 29, 2008
774
US
Greetings NEC Fans,

I have a SV-8100 that has no dial tone on the operator's telephone when she goes off-hook until she initiates a call. It had dial tone last week. Is there a code to turn-off dial tone?


Thank you.
Quaz
 
No such code exists. Have you tried swapping the phone? Possibly a bad hook switch. Or a bad port.
 
Belvedere,


Switched telephones. Same thing. No dial tone.


Quaz
 
Do you get CO dial tone when going off hook?
Does the phone have trunk keys or CAP keys?
If you have an unused station port, swap them.
 
I am going to play with it tomorrow when everyone is off. I will let you know. Thank you for the replies.

Quaz
 
A reset solved the the problem.

Thank you for your responses, Belvedere.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top