Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SV8100 License issue 1

Status
Not open for further replies.

Thomas VIII

Programmer
Jun 18, 2018
26
US
I can download the database through PCPRO but cannot upload. I get this error when I log in
"the system doesn't have enough license (256 port max port license) to accommodate this PCPro data"
Is there a way to fix this or a temp fix?
 
With Version 5000 or higher software, Temporary License activates all valid feature licenses and all
port maximum licenses. Temporary License is programmed using Telephone programming only. Web/
PC pro can be used when verifying the settings.
The Temporary License can be set up to a maximum number of 10 days.
When the number of days for the temporary license is assigned, system reset is required
for the license to take affect.
MB 90-37-01 through telephone set programming, set to 10, save + reset
 
When trying to access 90-37-01 it will not take that address. I did see 90-55 Free License select is unchecked. Should that be checked?
 
Then you may have to use the 60 day license. It can be used only once. The 10 day license can be renewed.
By default, the 60 Day Free License is set to disabled (Version 3000 and higher software). The
60 day count down starts when the system is initially powered on and continues if the 60 Day Free
License is disabled or enabled.
Default Settings
60 Day Free License is enabled (Version 2500 and lower).
60 Day Free License is disabled (Version 3000 and higher).
MB 90-55-01
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top