SV8100 Licence Reset

[MysteryPhantom]

Hi All,

I'm in a little predicament. Following a recent replacement of the SV and uploading settings etc I had forgot to load the licence files. It never crossed my mind due to the urgency of the situation. You've probably guessed it ... the 60 day trial has now expired. I know there is a way that this can be reset. Can anyone help me out/jog my memory? Feel free to PM if needed.

 

[mahirgul]

Unfortunately, you can not.

 

[mahirgul]

Sorry if you have NEC LMS login account you can create 2 demo license.
If you dont have NEC LMS account you can not.
Link

 

[belevedere]

You can try this;
Enabling the Temporary or Demo License

Products: SV8100 Categories: Basic Business
How do I enable the temporary or demo license on the SV8100?
Free Demo:
To enable the free demo license go to 90-55-01 and set to a 1.
Every CPU gets a free 60 day demo license. To see how many days are left go to 10-52-01.
Once you are finished using the Demo License you should turn off 90-55-01 or the license will continue to count downwards on the number of days left until it reaches 0 and it is no longer available.
An additional one time free 30 day full license is available on the NEC License Portal for all SV8100 systems purchased.
Temporary 10 Day License:
With Release 5 software or higher, a temporary full license for up to 10 days is set in 90-37-01.
This assignment is ONLY available through telephone programming.
To assign it, go to 90-37-01 and enter 1 - 10 for the number of days of the full license. System reset is required after applying this change for this to take affect.

 

[MysteryPhantom]

Hi thank you for all the responses. After the 60 day trial has finished, can you then still use the 30 day licence from the LMS? I know there is certainly a way to reset the 60 day trial. It is most certainly kept low key though!