sv8100 how to set up analogue trunks

[jeroentjed]

Hi there,

I'm working on my SV8100 with a CD-LTA card. On that card 8 digital and 2 analogue lines (not important) and 1 CO 1-4/BRI1 and one BRI2 port.
I want to use two analogue lines And I believe I can do that using the CO 1-4/BRI1 port.
I can't find where to set it right.
In 14-02 it says "no trunk ports exists".
I thought about adding trunks via programming --> unregistered trunks --> unused trunk lists But that only ads them to the trunk list in 14-01. I still can't open them in 14-02.

I think, but feel free to say i'm wrong, that i need to connect those trunks to the analogue part of the CO 1-4/BRI1 port. I have no idea how. Spend the whole day looking for it.

Anyone who can help me a bit further here?

 

[belevedere]

Circuit cards are recognized on a system reboot. If the card was installed and the system not rebooted, it will not see it. Try a system reset with the card installed. You could also use PCPRo, click on the cards icon, right click on the card slot and select the type of card to install. Upload, reset.

 

[jeroentjed]

Hi belevedere, thanks for answering. the card is visible in the system. No problem there. By the way, there is a difference between PCPro and WebPro, in the first one 14-02 is empty, in the webpro i can change settings.. very strange!

Phoning Dutchman - NEC SV8100 - Your help is greatly appreciated

 

[belevedere]

?? possibly a version issue bug with PCPro. Did you perform a download before looking at 14-02?

 

[jeroentjed]

Yes I did. Can't figure it out. The CO1-4/BRI port works, as a BRI port. I think I have to tell the system or the card that it should work as a CO1-4 port but I don't know how.

Phoning Dutchman - NEC SV8100 - Your help is greatly appreciated

 

[jeroentjed]

Ok guys, I figured it out. :-( It is a CD LTA card with a PZ--2BRIA daughter card. I need a PZ-4COTF daughter card. Already looking for it on e-bay.

Phoning Dutchman - NEC SV8100 - Your help is greatly appreciated

 

[CoralTech]

Ya, correct cards will help.