The mitel guy
Programmer
Does anybody here have the latest copy of the sv8100 firmware? i could also use a copy of the pc pro that matches as well i believe i have pc pro 11 for sv8100...
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sv8100 firmware needed?
- Thread starter The mitel guy
- Start date
- Status
- Thread starter
- #3
The mitel guy
Programmer
its not available as the system is discontinued and I dont have access to the downloads, but to answer your question yes i do have access to ntac
OzzieGeorge
Programmer
I don't know if it is the same for you guys but in Australia, we have an EoS (End of sale) tab on the TAC webpage and the 8100 is under that. They had to give us continued access to the last versions of firmware and PCPro because the instructions for doing upgrades from 8100 to 9100 had as a step in it that you must upgrade the firmware of the 8100 to the latest before converting the database to the 9100. If you don't have access to the 8100 software, that is the argument for getting them to give it to you!
- Thread starter
- #5
The mitel guy
Programmer
i have searched all over the ntac website to no avail... doesn't anybody have an archived copy they can send me?
belevedere
Instructor
Attached is PCPro v11. I only have software v10 for the 8100. Do you want it?
- Status