Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SV8100 as NTP Server

Status
Not open for further replies.

Onne

Technical User
May 18, 2014
6
ID
Hi All,

I have condition on my SV8100, already installed, Dterm DTL300, Analog Phone NEC AT40 & SIP Phone NEC ITX-1DE.
Register - OK
Call - OK
The telephone systems is not connected to Internet.

Question is, How to synchronize clock (Date & Time) the Sip Phone & the SV Systems ?
We already setting
On SV 8100. NTP Server sett (PRG 10-65)
On SIP Phone, I was setup NTP server to the IP of IPLA.
but not working?

I read from enhancement R9.5, the SV Systems must connected to the Internet for clock synchronization to the SNTP Server (PRG 90-56)
Is it possible to have date/time synchronization on SIP Phone and SV8100 Phone system?

Any help on this is very appreciated.

Thanks in advance.
 
Think about it, Where is the time synchronization coming from? Are you going to connect your own clock to the system somehow?
 
Thanks for attention,

as we known date and time can be set up manually on SV8100.
whether it is possible to use the SV8100 system clock for synchronization?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top