SV8100 and NORTEL PBX INTERCONNECTION

[soaressteevan]

IS IT POSSIBLE TO CONNECT SV8100 WITH NORTEL PBX?

HAVE ONE CLIENT WHO IS TRYING TO CONNECT WITH QSIG LINK.

I HAVE DONE PROGRAM 10-03-01 = 1 (T POINT)
81-06-01 (DEFAULT VALUE)

I AM ABLE TO ACCESS THE TRUNK, BUT NO DIAL TONE, AFTER SOME TIME IT GIVES DISCONNECT TONE.

FROM NORTEL SIDE LINK CAN BE SEEN,FROM SV8100 ALSO LINK IS UP.
ANY SUGGESTION?

THANKS IN ADVANCE.

 

[gmannatl]

I have been out of the NEC loop for a little while, but unless Q-SIG is something they have added in recent software updates it is not supported. There are quite a few ways that they could be integrated though (SIP Trunks, Gateway Device like an AudioCodes). I am willing to elaborate more, but the post is a little old.

Post back if you want specifics.

 

[belevedere]

You can use a standard T-1 or SIP trunks, but the 8100 does not support QSIG.