Supertrunk setup

[tweege]

can anyone tell me if there are any differences in setting up a supertrunk as opposed to a PRI? i am installing a system today that i was told had a pri circuit. i talked to the provider yesterday and it is actually a supertrunk with numbers pointed to it. it is setup as ami, sf, and out of a dms100 switch. the system is a magix 4.0.

thanks, tim

 

[Pepperz]

Programming of the switch for a PRI is entirely different from the programming of a T-1 or supertrunk.

Pepperz at newper dot net

 

[tweege]

lovely. any docs. or notes that you can point me to so this doesn't blow up in my face?

thanks,tim

 

[Pepperz]

They are posted elsewhere on this forum.

Pepperz at newper dot net

 

[tweege]

ok...is there somewhere more specific i can look? i searched by supertrunk but didn't find anything helpful.

thanks, tim

 

[Pepperz]

Look for PRI

Pepperz at newper dot net

 

[tweege]

maybe i am not smart enough to look at the right one, but i didn't find anything that looked like it would help me.

thanks, tim