Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Superpipe 155 Configuration

Status
Not open for further replies.

billmcc1280

IS-IT--Management
May 30, 2010
1
US
Is anyone familiar with the Superpipe 155 router?

I have 2 BRI isdn connections. The problem I am having is with NAT. I can configure the superpipe and make it manually dial my isp but that is basically it. It will not forward packets. < NAT does not work. Does anyone have an old config file or a quick step by step guide on connecting this guy to the net. I have looked at all the pdfs that are available but none really cover calling an isp. they all cover point to point, bridging and what not.

I bought the superpipe for the 256k bonding and POTS. I was using a Cisco 804 at 128k with pots but decided to bond more lines. Right now I am running a cicso 2621 256 bond with no voice.

I get a dynamic address from the isp. can run with or without dhcp on the lan side.

And before anybody says why don't you get DSL or Cable. neither are offered in my area. :(

Thanks in advance!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top