loschiavoj
Programmer
I have installed a SunPCi III card in a V240. According to the Sun documentation the server now supports the use of the card, however the v240 is unable to see the card after the software has been installed. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SunPCi III in a V240
- Thread starter loschiavoj
- Start date
- Status
Sorry I hit the wrong button.
1. go to 2. knowledgebase
3. sun system handbook
4. server
5. V240
6. full component list
7. Miscellaneous
8. option 2134A
9. Look at the system supported, you will not see a V240
10.look at notes (bottom) States it isn't supported.
1. go to 2. knowledgebase
3. sun system handbook
4. server
5. V240
6. full component list
7. Miscellaneous
8. option 2134A
9. Look at the system supported, you will not see a V240
10.look at notes (bottom) States it isn't supported.
- Status
Similar threads
