GDScarbrough
Programmer
I am trying to connect a NEXsan RAID which was configured on a Sun Blade 2000. It was created with 4 equal sized partitions. I need to have one partition connected to a Sunfire 240 and the other 3 on the SunBlade 2000. It has dual controllers, host0 and host1. When I connected the SCSI cable to host1 from the sunfire 240, I could see the disk, but it was unidentified when I did a format. I selected the disk and it brought up a list of drive types. Is there a file on the SunBlade which contains the setting for the NEXsan since it show up right there and one on the sunfire I can add the settings to?