Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sun Fire v880 How to get ok prompt from RSC

Status
Not open for further replies.

ruzalia

Technical User
Aug 31, 2010
2
PL
Hi

I can not get ok prompt to boot solaris from CD. Could someone tells me what Am I doing wrong:

1. power on the system
2. rsc> console
3. after banner was dispalyed I try to send break (I try diffrent terminal emulators like HyperTerminal -> Ctrl-Break, Ctrl-Pause, Putty -> Special Command -> Break) but no results, system boots

I try also:
rsc> bootmode forth
rsc> reset

that works but I get ok prompt to soon, I can not execute any command e.g. "setenv auto-boot? false"

What wrong Am I doing?

How to disable RSC to redirect the I/O to ttya (I don't know root password), remove RSC card?


Thanks in advance
Rozalia
 
try the steps below to set the output back to the terminal.
ok setenv diag-out-console false
ok setenv input-device keyboard
ok setenv output-device screen


if that didn't work , then remove the RSC card and reboot the server !!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top