Summit48 Power up no led's on front panel

[iwanalearn]

I was in the process of changing the IP address of my summit48. I accidentally turned the power off. Now when I turn the power on none of the led’s on the front light up and I can’t get the console to connect. What can I do?
Thanks

 

[iwanalearn]

OK, I found the solution on a different forum. What I needed to do is pull the power cord from the unit. They suggested 1 minute. That wasn't long enough. So, I pulled it for the weekend. Plugged it in and away it went. I also found out that you can't do a reboot with the web interface it's a bug in the software. So from now on it a console connection for my Summit 48.