Hi all
I have a situation here and need a little help with one summit 48i.
The question is:
I have one summit 48i behind adsl modem.
The network behind modem is 192.168.1.0/24
Ip addres of modem is 192.168.1.1 (gateway to)
On summit 48i, I setup one vlan (i-net) with ip 192.168.1.2/24 and default gateway 192.168.1.1 and i can ping 208.67.222.222 (for example).
Then I set another vlan (lan) with ip address 10.10.1.0/24.
In this vlan I have one linux server.
I setup NAT rules to allow linux server to talk to the internet.
Everithing works fine.
The problem is that I want to access my linux server through SSH.
This switch (summit 48i) is overkill for stupid configurations like this one, but after readeng all manual (2-3 times) I can't find nothing about port mapping (except this in nat chapter that intiates from inside).
I need to map 192.168.1.2:22 to 10.10.1.10:22 and to use SSH
Please help.
Regards
DJ JAM
I have a situation here and need a little help with one summit 48i.
The question is:
I have one summit 48i behind adsl modem.
The network behind modem is 192.168.1.0/24
Ip addres of modem is 192.168.1.1 (gateway to)
On summit 48i, I setup one vlan (i-net) with ip 192.168.1.2/24 and default gateway 192.168.1.1 and i can ping 208.67.222.222 (for example).
Then I set another vlan (lan) with ip address 10.10.1.0/24.
In this vlan I have one linux server.
I setup NAT rules to allow linux server to talk to the internet.
Everithing works fine.
The problem is that I want to access my linux server through SSH.
This switch (summit 48i) is overkill for stupid configurations like this one, but after readeng all manual (2-3 times) I can't find nothing about port mapping (except this in nat chapter that intiates from inside).
I need to map 192.168.1.2:22 to 10.10.1.10:22 and to use SSH
Please help.
Regards
DJ JAM