Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Summary of Total Val Card TN2501AP Usage More Then 60 Minutes

Status
Not open for further replies.

Benz_23

Systems Engineer
Oct 11, 2019
3
ID
Hi All,
Why when I check the total use of val board that has been used and that has not been used the total amount of more than 60 minutes?
because based on avaya's documentation, the maximum total capacity is only 60 minutes for the TN2501AP val card type

The following data usage on the Val:
Used: 45 minutes
Time Remaining: 20 minutes
total: 65 minutes (more than 60 minutes)
 
If 7 minutes for overhead, so the total time based on data on the val is 58 minutes after subtracting 7 minutes for overhead, right?
 
0xFC0 [4032] / 0x3C [60] = 0x43 [67] and a remainder of 0xC [12]

4032 seconds divided by 60 is 67 minutes 12 seconds

1 hour of record time and the rest is for overhead

Overhead is space on the board to support the filesystem commands like
"list directory /annc board 1c17" and the "ftp" commands to view data.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top