Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Submirror Needs Maintenance 1

Status
Not open for further replies.

ahmedmt1981

Technical User
Nov 22, 2006
20
AE
Dears
when I excecute metastat command
it seems my one way mirror status (Need maintenance)what should I do???????
the O/P of the command is shown below

d20: Mirror
Submirror 0: d21
State: Needs maintenance
Submirror 1: d22
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 10241505 blocks (4.9 GB)

d21: Submirror of d20
State: Needs maintenance
Invoke: metareplace d20 c1t0d0s0 <new device>
Size: 10241505 blocks (4.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s0 0 No Maintenance Yes


d22: Submirror of d20
State: Okay
Size: 20480121 blocks (9.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s0 0 No Okay Yes
 
it's depending on further system messages...
1) if the disk failed, replace it, format it and reenable the devices
2) if the disk is ok, just reenable it with "metareplace -e d20 c1t0d0s0"

Best Regards, Franz
--
UNIX System Manager from Munich, Germany
 
you're welcome! Thanks for the Star! :)

Best Regards, Franz
--
UNIX System Manager from Munich, Germany
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top