Sublimaton process and magenta

[adiMasher]

Okay Spyderix.

I was hoping that since the other issue seemed to be of the same nature I would have my answer.

The issue at hand is that the epson 1280 printer had worked fine for about 3 months and then no matter what has been tried the images come out with too much magenta hue. I think it's important to mention that this is during the sublimation process.

what should I do.

If the sky is blue and the Sun is yellow.... Why isn't the air Green?

 

[thombathe]

I don't have an epson 1280 but I ran it this with my printer.
The problem I had was I installed third party inks when I went back to using Lexmark inks it solved the problem.

Thom

The longest jounney starts with the first step.

http://www.thombathe.com

 

[SPYDERIX]

Hi,

As Thom said, you should always use the proper ink for the printer. Perhaps your current cartridge is running out or faulty. Have you tried putting in a new cartridge, or is this one new?

Hope this helps!

Nate

http://www.mainframe-webdesign.com