Sub report parameters

[ptrifile]

I have a report with 3 sub reports. I would like to be able to choose parameters separately for each report but right now the main report is passing the information to all 3 sub reports. i have removed all sub report links and tried adding different ones and nothing seams to work.

Has anyone seen this happen? any suggestions?

Thank you in advance!

Paul

 

[lbass]

After removing the links individually for each sub, check the record selection formulas in each subreport (report->selection formula->record) and make sure the formulas are using parameters created within the sub (looking like this: {?parm}) and not the linking parameters, which look like this: {?pm-?parm}.

-LB

 

[ptrifile]

i checked all the parameters in all three sub reports and they are all {?parm} and i get the same result, the main page is still passing all the parameters. Is there anything else that i should check?

Thanks

Paul

 

[lbass]

In the main report->edit->subreport links, highlight each subreport and remove the links, one at a time. If the links are really all removed, you will be prompted separately for each parm in the subs.

-LB