STRTWEB fails to load

[zevona]

Greetings All,

Running NW6.5.5 and GW 7.0.1

Tomcat4 loads fine
AP2WEBUP loads fine
APACHE2 loads fine

When I load STRWEB I get the following (below)
So I found TID 10100507 which mentions to modify the WEBAC65A Object in
Console One, but I don't have this object. I do have the WEBAC70A folder
in my sys:\grouwpise\domain\wpgate folder.

Is this my problem?

Thanks in advance,

-andy-

SERVER-5.70-124: Unable to unload module NTLS.NLM (error 2)
Loading module GWINTER.NLM
GroupWise Web Access Server (release version)
Version 7.00.01 June 13, 2006
(C) Copyright 1996-2006 Novell Inc. All rights reserved.
Module GWINTER.NLM load status OK

GWINTER: CMC initialization of the GroupWise domain database failed (d705)
GWINTER: CMC initialization of the GroupWise domain database failed (d705)

->Deregister Failed - IPMGMT is loadingGWINTER: Return from IPMgmt Register = -1

GWINTER: Return from IPMgmt Register = -1
GWINTER: CMC is shutting down...
GWINTER: CMC is shut down
GWINTER: Terminating WebAccess Server
Module NTLS.NLM is being referenced
You must unload NPKIT.NLM before you can unload NTLS.NLM
SERVER-5.70-124: Unable to unload module NTLS.NLM (error 2)
Module NTLS.NLM is being referenced
You must unload NPKIT.NLM before you can unload NTLS.NLM
SERVER-5.70-124: Unable to unload module NTLS.NLM (error 2)
Module NTLS.NLM is being referenced
You must unload NPKIT.NLM before you can unload NTLS.NLM
SERVER-5.70-124: Unable to unload module NTLS.NLM (error 2)

 

[marvhuffaker]

You should have a configuration file called 'WEBACC70A.WAA' (OR SOMETHING VERY SIMILAR).

Make sure this file contains the path to your Webaccess Gateway directory. For example, this line should exist (replace with your own path):

/ph=\\server\volume\grpwise\domain\WPGATE\WEBAC70A

Also, the config file mentioned above should be referenced in your STRTWEB.NCF file like this: load gwinter @webacc70a.waa



Marvin Huffaker, MCNE

http://www.redjuju.com

 

[zevona]

Revised - OK - so I was able to add the object in Console1. STRTWEB now loads,
no errors. I redirected the httpd.conf file to gw/webacc.

When I hit

http://myserver/

I get a page that has the index (file
listing) of Y:\Apache2\htdocs Looks like a redirection issue? I have no
error anywhere in the logger screen, jave, etc.

-andy-

 

[marvhuffaker]

You should have an INDEX.HTML file in htdocs. if it's not there, that's why you get the directory listing.

The GroupWise install will change the default INDEX.HTML file so that you get GroupWise webaccess.. but only if you tell it to.. If you don't choose that option at the start, it puts a file in the htdocs called "NOVELL.HTML" that you can just rename to INDEX.HTML.

Marvin Huffaker, MCNE

http://www.redjuju.com

 

[terry712]

7 doesnt prompt you to cahnge it
that was earlier versions

you need to modify your index.html and add a redirect in
there is a tid on this as you can do it in http.conf or the index.html

index.html is easier