Strange route pattern digit loss

[ridge1983]

Hi,

I am struggleing with a problem on a g3v8.04.0.046.5.
I am trying to delete some digits from ars so that I put the right country codes in on the route pattern. The trunk is a CAS link with wink start.
If i do a list trace on the TAC with no translations in the route pattern i can see all the digits come through and then sent to line. This works fine but cannot make a call because the number is prefixed with a 1. I thought i could take this 1 out by removing a single from the route pattern. In doing the same trace on the TAC it is now removing 8 digits from the dial string!! I have checked in the ars digit conversion and theres nothing there. Telling the route pattern no to drop any digits puts the trace back to normal

 

[84Mike]

You could use Prefix Mark '0' to remove the 1. This is located in the route pattern. You can do this for individual trunk groups there.

 

[ridge1983]

This wouldnt work for me. The people dial 0(ars) 1(to select trunk - digit to be dropped from outgoing call) 0044(to call england) xxxxxxxxxxxx(Rest of number).

I need to translate this too 01144(American code to call england)