Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

strange behavior, can not access service, packets "accepted".

Status
Not open for further replies.

shsrthsrthsrthsr

IS-IT--Management
Dec 9, 2007
1
US
I have a service(term service) on Host1 that I am trying to access from the private network behind Firewall1. I can access the service using telnet from Host2 and Router1 but not from Host3, Router2, and Firewall1. Firewall1 is a Checkpoint Firewall on Nokia. SmartTracker is showing the packets as being "accepted", so it does not seem to be an access list problem.

network.jpg


All other network access seems to be working perfectly. Host3 can access internet sites (Nat'ing performed on Firewall1).

Mabey a Nat'ing problem?


Thanks
 
If the packets are going out then its probably a routing issue host 3 has no route back to the firewall. Might be useful if you could get a switch between the firewall and the router and packet sniff it to see if the packets are making it to router1.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top