Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Storagetek 9730 Library 1
- Thread starter mollify
- Start date
-
1
- #2
notthehoople
IS-IT--Management
Hi,
Been a while since I've seen one of these - hope my memory holds!
1. Open the library
2. Press the 'Unload' button on the problem drive.
3. Wait for the 'Operate Handle' button to light
4. Lift the brown(?) handle thing attached to the right hand side of the drive. This is the equivalent of the operator handle on a standard DLT drive. The handle should move upwards and click into place.
5. Pull the tape out.
Hope this helps!
Been a while since I've seen one of these - hope my memory holds!
1. Open the library
2. Press the 'Unload' button on the problem drive.
3. Wait for the 'Operate Handle' button to light
4. Lift the brown(?) handle thing attached to the right hand side of the drive. This is the equivalent of the operator handle on a standard DLT drive. The handle should move upwards and click into place.
5. Pull the tape out.
Hope this helps!
- Status
Similar threads
- Locked
- Question
- Locked
- Question