Storagetek 4410

[12345c]

Hello All,

Yesterday the libary stopped working with the following error.i IPL the libary and is back up.I had a look at the hands there was nothing stuck in the hands.Do you think this
could be a hand problem were both hands failed.Could anyone
let me know What FSC6320.

ACS 00 Degraded:LSM0,Condition1,FSC6320.

SLS0669A ACS00 LSM0 not ready 4.
SLS0665E ACS00 Degraded,LSMO,Condition1 FSC6320.

Many thanks.

Instructor.

 

[TekAndy]

The FSC 6320 states:
6320;006;LSM 0 inoperative: mechanism failed.

Not very descriptive as to what mechanism failed. Do you know what part of the init was going on?

Andy

 

[12345c]

Hello,

This is the problem i was faced with.The libary just went down only FSC 6320 reported.I think it could have been a
hand problem.As hand 1 had a blown lamp and it could have
been doing somethin and could not read the bar code.So i
replaced the lamp and did a long INIT everything seems to
be fine at the moment.Thanks for replying.

 

[TekAndy]

Yep, the blown lamp will also cause it to have problems reading a target along with the bar code labels. Good Luck!!

Andy

 

[12345c]

Many thanks for your input all seems to be fine.

Will keep you updated if it does go down again.