Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
storage center is disconnected
- Thread starter dmouge
- Start date
1 LOGGGER 2 CLS's
Is it possible to have 2 CLS's connected to 1 digital logger V8.8.
Cls's will be as follows:CLS1 ver 8.8 ericsson md110 switch driver(applink). CLS2 ver 8.9 ericsson md110 switch driver Genesys.
Recording channels are spread amongst logger some will be genesys others normal extns. System is total recording extn side. Also storage centre will need to store calls from both sources what is required to permit. Storage centre ver 8.8
Is it possible to have 2 CLS's connected to 1 digital logger V8.8.
Cls's will be as follows:CLS1 ver 8.8 ericsson md110 switch driver(applink). CLS2 ver 8.9 ericsson md110 switch driver Genesys.
Recording channels are spread amongst logger some will be genesys others normal extns. System is total recording extn side. Also storage centre will need to store calls from both sources what is required to permit. Storage centre ver 8.8
- Status
Similar threads
- Locked
- Question