Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stopping outgoing calls on an extension

Status
Not open for further replies.

CMADC

IS-IT--Management
Aug 9, 2012
2
US
If I understood an earlier thread, if I remove the extension from the proper list, I will disable the ability for the extension to make outgoing calls (especially overseas).

This is our printout of the information from WINAMPS showing LIST 7 - Which I think is the list I need to modify (but am not sure how I would get to List 7).

FOR REMOTE ACCESS 17 & 18 MEAN TIE & NON-TIE RESTRICTIONS

List 7 STNS 6810 6870 4839 6833 6812 1805 6895 6807 6809 4841
7110 6824 4843 4842 6825 6866 6827 6816 6814 6813
6815 6853 7260 8201 6844 6861 6862 6851 6811 6831
6832 6863 3841 6536 6537 6888 6819 6818 6802 6144
6845 6846 3843 6848 3828 3831 6804 3847 6881 6883
6882 6875 3848 3842 6712 6713 6714 6715 6716 6717
6718 6719 6720 6721 6722 6723

RACC
AUTOMATIC ROUTE SELECTION


ARS IS: ACTIVE ACCESS CODE: 9


TABLE 1: Area Code
01)011 02)--- 03)--- 04)--- 05)--- 06)--- 07)--- 08)--- 09)--- 10)---
11)--- 12)--- 13)--- 14)--- 15)--- 16)--- 17)--- 18)--- 19)--- 20)---
21)--- 22)--- 23)--- 24)--- 25)--- 26)--- 27)--- 28)--- 29)--- 30)---
31)--- 32)--- 33)--- 34)--- 35)--- 36)--- 37)--- 38)--- 39)--- 40)---
41)--- 42)--- 43)--- 44)--- 45)--- 46)--- 47)--- 48)--- 49)--- 50)---
51)--- 52)--- 53)--- 54)--- 55)--- 56)--- 57)--- 58)--- 59)--- 60)---
61)--- 62)--- 63)--- 64)--- 65)--- 66)--- 67)--- 68)--- 69)--- 70)---
71)--- 72)--- 73)--- 74)--- 75)--- 76)--- 77)--- 78)--- 79)--- 80)---
81)--- 82)--- 83)--- 84)--- 85)--- 86)--- 87)--- 88)--- 89)--- 90)---
91)--- 92)--- 93)--- 94)--- 95)--- 96)--- 97)--- 98)--- 99)--- 100)---



Joel Schreibman
Community Medical & Dental Care, Inc.
Monsey, NY
 
That's the wrong print. You need to print disallowed lists and allowed lists. This will show what extensions are assigned to each group. But, in WinSPM, under extensions, you will see an option for Restriction. If you change this to internal only the extension can't make outside calls (unless the extension is apart of an allowed list which over rides this).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top