Stop Record

[powercom]

Dear All,
How can stop two way recording via card V-IPGW16 between two PBX .

Thank You So Much

 

[Ired]

And what kind of equipment do you use?

 

[powercom]

Hello , KX-NS500

 

[Ired]

Do you use "Automatic 2wayRec for Manager" feature?

 

[powercom]

Hello, Yes I use Automatic 2wayRec for Manager .

 

[Ired]

If you need to record other CO's (not H.323) calls, you can't stop recording calls via V-IPGW.

You can disable or enable recording of all CO-calls (can't choose a trunk-card for record).

What kind of equipment do you use at the other side of V-IPGW card? Perhaps it's better to set up a OneLook network...

 

[powercom]

Hello Ired ,
On the other side, there is a PBX KX-TDA100 With card KX-TDA0490 16-Channel IP Gateway Card (IP-GW16).

 

[Ired]

Well, you can upgrade your TDA100 to KX-NS1000 system and connect NS1000 and NS500 using OneLook network. In this case both your PBXs will behave as one standalone system. The IP-channel between them will not be considered as a trunk but as an intersystem-data communication channel.

Please contact your dealer for further information.

 

[powercom]

Thank You So Much.