Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Still confused by filters

Status
Not open for further replies.

eclidad

Technical User
Jan 5, 2005
81
I thought I had exclude filters figured out. I was wrong. We are running R12 and I want to use it to exclude a file from a network machine. The file will always give W3406 (Lock violation) and cause an "incomplete" to be shown for the job status. In the job setup I expend the "network" menu item and set a filter by clicking on the machine name and adding a filter (file exclude) for

c:\M90W\MAS90\HOME\LIB\KEYS\activate.pvx

This shows up as a node filter if I look at the job detail. If I right click on the same machine name and select "use agent" the check box to enable this is not selected.

Is this something I need to do with global filters? I've looked through the administrator's guide and don't see anything that describes when you use global filters and when you use them on a machine by machine basis. I've got other filters that are working. This are setup just for the machine and are all for linux hosts.

Any guidance, including pointers to docs, would be helpful.

Also, what does the "use agent" do? My backup works without it being selected. I've got an agent on the remote machine and it seems it wouldn't work without it.

- Joel
 
I've got my filter working but still don't understand the purpose of the "use agent" checkbox. The problem with the filter was that when I selected the files to be backed up I clicked the box next to the share name of the directory. When I added the filter I used the drive letter and pathname. If I use the share name followed by the pathname and filename then it works as it should. My filter should have been

\M90W\MAS90\HOME\LIB\KEYS\activate.pvx

- Joel
 
When you expand a server that is not selected to use the again to select which drives are the $c $d or c d? When I do a job without an agent it only shows the shares and not the "true" drives. But I could be wrong.
 
The choice of drives I see is the same whether "use agent" is selected or not. I always see C$ and M90W. When "use agent" is selected I can add the system state into my backup.

- Joel
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top