Still can't get remote access on Partner ACS R6 to work

[OLVtelephoneman]

Thanks to 392 I fixed the first problem with my remote ACS access (selector code 7). But now when I dial in and press 776 it says, "Your call cannot be transferred to extension 77". Obviously it doesn't recognized 776 as a code for Hunt Group 6. But if I'm at a local phone and punch Intercom 776 the modem tone comes up immediately, so I know the Hunt Group is working. Any suggestions? Do I need to define extension 76 in Partner Messaging as a transfer only extension? Thanks!

 

[TouchToneTommy]

Yes

 

[itpphoneguy]

Also 776, otherwise just dial 76. The other way is to inlude *8 <pause>76. In this case ext 76 needs an xfer only mailbox.
-Chris