soaressteevan
Technical User
HI,
Is it possible to get SMDR on station to staion call on 2000IPS?
what programming?
Is it possible to get SMDR on station to staion call on 2000IPS?
what programming?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Station to Station SMDR on 2000IPS?
- Thread starter soaressteevan
- Start date
- Status
From SMDR manual
(3) SMDR Output Information
• Call Record for Outgoing Trunk Calls
• Call Record for Incoming Trunk Calls
• Call Record for Station to Station Calls [Series 3600 software or later] NOTE 1, NOTE 2
NOTE 1: Call record for station to station calls is available by using the following SMDR interface.
- SMDR with AP00 (PN-AP00-B/PN-AP00-D with MRCA program)
- MP built-in SMDR on RS-232C
- MP built-in SMDR on IP
NOTE 2: Call record for station to station calls is not available in Centralized Billing-CCIS.
From Command Manual
Allow SMDR service for station-to-station calls in Service Restriction Class A assigned by CM12 Y=02.
[Series 3600 software required]
15213 :00-15: Service Restriction Class A assigned by CM12 Y=02
0 : Allow
1 : Restricted
(3) SMDR Output Information
• Call Record for Outgoing Trunk Calls
• Call Record for Incoming Trunk Calls
• Call Record for Station to Station Calls [Series 3600 software or later] NOTE 1, NOTE 2
NOTE 1: Call record for station to station calls is available by using the following SMDR interface.
- SMDR with AP00 (PN-AP00-B/PN-AP00-D with MRCA program)
- MP built-in SMDR on RS-232C
- MP built-in SMDR on IP
NOTE 2: Call record for station to station calls is not available in Centralized Billing-CCIS.
From Command Manual
Allow SMDR service for station-to-station calls in Service Restriction Class A assigned by CM12 Y=02.
[Series 3600 software required]
15213 :00-15: Service Restriction Class A assigned by CM12 Y=02
0 : Allow
1 : Restricted
- Status
