Station Module

[dvannoy]

Norstart-PLUS Modular ICS 3.0

is there a way to tell if a station module is bad?

Thanks in Advance

 

[Arr]

dvannoy,

Best to call a vendor who has experience in trouble shooting fiber expansion card/ fiber DS 30 cable/ expansion module issues. There is no one thing to look for here. Lots of steps in this one. Properly done, your KSU gets shut down at some point during this kind of trouble shooting. Timing is important.

A quick check of the power indication light on the effected module would be a good first step.

PhM



VVV

 

[dvannoy]

Yaa I checked each module and do have the red light on. I was just wondering if there was a log entry that gets recorded for something like this.

 

[dvannoy]

is there a way to look at what module a extension is on?

 

[Arr]

dvannoy,

Yes in a way. But you have to know the logical punch down in the wiring closet for CO truncks, and stations. In Maintenance you will find a 'module' status report, but again, you will have to understand the logical set up of the KSU.

Do you have a bunch of phones that are out of service?

PhM



VVV

 

[dvannoy]

yes I have about 10 phones out right now.. and I understand the logic of the wiring etc.

 

[luv2ski]

did you reseat the fiber patch

ski season has started

 

[Roldan]

Go to Maintenance>Module Status and enter the module number, you'll see whether the KSU sees the Station Module or not.

Louie Roldan

http://www.4vertex.com