Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Static on outgoing lines
- Thread starter will1023
- Start date
technickelone
Programmer
Are you going out over a LD T1. I have been getting hammered with those lately.
- Thread starter
- #3
LACITYTech
Technical User
Are you getting static on Analog and Digital??
We had this problem at one time on Analog lines usually on the same card and before a patch was loaded into the Switch by the vendor, the only way we could clear the problem was to disable the card and reseat it and reenable it.
Good Luck,
LACITYTech
We had this problem at one time on Analog lines usually on the same card and before a patch was loaded into the Switch by the vendor, the only way we could clear the problem was to disable the card and reseat it and reenable it.
Good Luck,
LACITYTech
- Status
Similar threads
- Locked
- Question