static IP settings new 6920/30/40 phones

[tlpeter]

I just got the new 6920 and 30 and i want to configure these with a static IP (don't ask why)
I can set everything except VLAN.
I need to set a VLAN which is basic networking stuff but the option is not there.
I also do read about the teleworker option which isn't there either.
Anybody played with these phones already?

BAZINGA!

I'm not insane, my mother had me tested!

 

[tlpeter]

Ok, found it.
When you go to the network setting you can actually go down too while there is no arrow.

BAZINGA!

I'm not insane, my mother had me tested!

 

[SXWizard]

On the 6940 Press the Setting button (above the volum control) and then Config Teleworker will appear in the top row of icons. Problem I had with Teleworker was that the phone wanted a PIN even though Restrict MiNet devices was disabled on the MBG. Only way I could get the phone to register with the 3300 was to put the MAC address in the phone settings in User and Devices.

 

[tlpeter]

The pin is the registration code i found out.
A bit nasty as it is not a good translation for what it wants.

BAZINGA!

I'm not insane, my mother had me tested!

 

[SXWizard]

Upeter - thanks, I couldn't figure out what the PIN was either. Ended up putting the MAC in Users and Devices to get the set working. The User Guide also made no reference to the PIN being the registration code.