Stat on one of my DTR/PRI card show

[rampage60]

Stat on one of my DTR/PRI card shows this, with the channels disabled. I have disabled that card and
re-enabled it but no change. Any suggestions? Thanks!


DTI TRK LOOP 5 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
DTA030 5

SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : YELLOW
CH 01 - DSBL TIE VCE CH 02 - DSBL TIE VCE
CH 03 - DSBL TIE VCE CH 04 - DSBL TIE VCE
CH 05 - DSBL TIE VCE CH 0SBL TIE VCE
CH 07 - DSBL TIE VCE CH 08 - DSBL TIE VCE
CH 09 - DSBL TIE VCE CH 10 - DSBL TIE VCE
CH 11 - DSBL TIE VCE CH 12 - DSBL TIE VCE
CH 13 - DSBL TIE VCE CH 14 - DSBL TIE VCE
CH 15 - DSBL TIE VCE CH 16 - DSBL TIE VCE
CH 17 - DSBL TIE VCE CH 18 - DSBL TIE VCE
CH 19 - DSBL TIE VCE CH 20 - DSBL TIE VCE
CH 21 - DSBL TIE VCE CH 22 - DSBL TIE VCE
CH 23 - DSBL TIE VCE CH 24 - DSBL TIE VCE

 

[PERRYPJ]

YOU HAVE A YELLOW ALARM WHICH MEANS YOUR TRANSMIT SIDE IS NOT GET TO THE OTHER END, MOST LIKELY TELCO

OLD ROLMEN WORKING ON NORTELS

 

[rampage60]

I disabled, then re-enabled the card and 5 min. lator the channels came up. : )