Startup Profile Template

[BCMTinkerer]

I have tried several times to use the Startup Profile Template to start up a new system, although I have followed the directions explained in the BCM documentation it does not work. I have tried it on 2.0, 3.0 and 4.0.
Has anyone had any success using the startup profile template?

 

[Dasheen]

Nope.

 

[MagnaRGP]

Yep. However, you cannot use the template if you have already applied the keycode to the BCM. The keycode is applied as part of the startup template.

 

[BCMTinkerer]

I have tried to apply it before any keycodes were installed, the system is fresh.
I am using a 512 usb flash drive, it is 2.0, it is backwards compatible with 1.0

 

[Khosher]

Ensure the flash drive is formatted with FAT32 file system.

 

[BCMTinkerer]

It Is

 

[subx]

Did u try any other USB Sticks... I had the problem with some sticks also but it always did work with San Disk USB Sticks..