Startalk Mini 1

[totaletech]

I have a startalk mini Rel 3 connected to a MICS 8X24 DS Rel 01.

Im trying to setup the auto attendant. Im able to get it configured in the Startalk however it wont answer.

Is there something I need to activate in the MICS?

 

[Sphoneman]

Did you set Admin, AA, Lines, to Answer yes & number of rings ( "0" is immediate-within a ring cycle) this must be done for each line to answer.

Steve
tele-dataservices.com

 

[totaletech]

yep, that is all set.

 

[trabra]

Totaletech:

Go to

http://www.jandjcommunications.com

and into the reference section. Scroll down until you see Startalk. This is a very handy reference when setting things up and check to see that you have covered all bases. I've used the one for the Flash and found it most helpful!

Exsmogger is an active participant in this formum and think responsible for the various references posted on this web site. THANKS EXSMOGGER! I've used these many times!