Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

StarTalk Mini

Status
Not open for further replies.

AMDMaine

IS-IT--Management
Jun 4, 2007
7
US
I powered down a working Mini. When I powered the unit back up, it now says "Feature Inactive" when trying F893, F980 and F981. I tried a M7310 on the port and it works.
 
Have you let it cycle long enough, I've had that problem on one mini, never came back up.

See if Feature 985 works, see were the port is for the VM
and/or
Try Feature 903 and rebuild the voicemail simply say "OK" and have it reboot.

 
F903 will only work on latest releases of Flash

The Mini is at the point where it is risky to power it down, it maybe that you didnt give it 10 minutes to boot up or the hard drive just went on the power down.


 
On a system phone -M7310 or better- press feature 9*1. Sometimes the ksu will mysteriously loose the feature assignments, and it may seem that you've lost your vm prog when you haven't.

After f9*1, try to log in normally.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top