StarTalk - hard(2.2) & soft(2.0.2o) 1

[SergSerg]

I have StarTalk (NT8B73AC): H/W - 2.2 ; S/W - 2.0.2o (1995)

This piece worked with 8x24, in due course it began to be disconnected. Also has then ceased to work.
Whether it is possible software upgrade that it worked with MICS DR2.0 or is higher. Now at me is not present PBX 8x24 to check up serviceability. I have MICS and CICS. As it is possible to test on MICS or CICS?

 

[Arr]

Serg,
Just had one fail. They are not upgradable for ICS. If you try and it works post back. The units have been out of production for a while.

PhM

 

[exsmogger]

I know an old Startalk will work with R1T1, and supposedly will work on an MICS up through R3. Definitely won't work right with R4 and higher. You will have all sorts of transfer problems.

Brian Cox

http://www.jandjcommunications.com

 

[Arr]

Brian,
thanks.

PhM