Startalk Flash Inactive 2

[stowne]

Hey All,

have a system that may have been spiked... all computers were restarted over the weekend.

When Star Talk picks up all it does is hangup on the incoming call.

All features except 983 are now inactive including 903.
When 983 is activated it just dumps to EXIT when the password is entered.

Hooked in directly via modem cable and rebooted:

Nortel Norstar Flash Diagnostics Started. Please wait.

Version Code: 06VBK046

NVRam Test: Passedtream, ACD_LOAD ON, KEYCODELESS_VM ON
B84 Test: Passed
Access:
Program ROM: Passed
Language:
RAM Disk Start: Passed
ROM Disk Start: Passed
O/S Start: Passed
VFS Test: Passed
VFS Start: Passed
Timer Test: Passed

Version Code: 06VBK046
Stream: Merged Stream, ACD_LOAD ON, KEYCODELESS_VM ON
Access: Access 4.0 and above
Language: US English / US Spanish

Starting Nortel Norstar Flash Access/2
Starting Nortel Norstar Flash Application.

Password: “SYSMGR”

Nortel Norstar Flash configuration in progress. Please wait.

Password:

AS you may notice the sysmgr command just returns you to the password prompt.

Any thoughts?

 

[jerryreeve]

sounds like the system defaulted. I would try one more power reset and if that dosen't bring it back you will probably have to initialize the flash. do feature 9 8 3 2 6 6 3 4 4 and re-build the whole thing.

JerryReeve
Communications Systems Int'l
com-sys.com

 

[stowne]

Rebooted a number of times without success.

System reset worked,,,, now comes the rebuilding...

Thank You