Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Start and stop voicemail via Telnet

Status
Not open for further replies.

gbon851

IS-IT--Management
Aug 5, 2003
60
US
Voicemail is out of service on all phone extensions, other than that phone are working fine. Can't log into voicemail via web interface. Get internal system error message. How do I stop and start voicemail via telnet? Using Mitel 3300CX.
 
not telnet but SSH to port 2002 (RTC) i think. Command is ipVM stop then ipVM start. I might have the capital letters wrong way round but I am sure someone will put me right
 

RAW telnet connection to port 22

Should be able to use these commands:

vmPortStatusInfo

iPVM_Stop
iPVM_Start
iPVM_Status

 

Yes, I'm getting confused! It is a raw telnet connection on port 2002

It is not any sort of SSH connection and is not on port 22

 
This command and many others can be found on the FAQ page.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top