jadethedog
IS-IT--Management
- May 18, 2009
- 1
Hi ,I just inherited this system and dont have a clue where to start.I do have the user guide but when I try to access programming from the 100ext I dont get anywhere.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Starplus sts
- Thread starter jadethedog
- Start date
- Status
password should be **3324 or 3326 (I think lol.. not infront of the system to verify) unless it has been changed. Programming is all done via the flash programming. You won't get anywhere with the user guide at all. What you need to do is get ahold of the programming manual.
------------------------------------
Dallas, Texas
Telecommunications Tech
CCVP, CCNA, Net+
CCNP in the works
------------------------------------
Dallas, Texas
Telecommunications Tech
CCVP, CCNA, Net+
CCNP in the works
telcorookie
Technical User
- May 21, 2009
- 141
Google the manual, that system you can program with your eye's closed and hands tied behind your back. Bookmark the PDF attached. Look over it a little and let us know if you need any help understanding any of it.
Good Luck
Good Luck
telcorookie
Technical User
- May 21, 2009
- 141
The manuel i dont leave the office without if i go to a sts customer..
look on right side and download the complete user guide. All the info i think you will need.
look on right side and download the complete user guide. All the info i think you will need.
- Status
Similar threads