Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Star* 67 - block callerID
- Thread starter smich
- Start date
- Thread starter
- #3
How are you setting up the PRI call? Fixed settings or Call by Call Settings?
_______________________________________________________________
If you did not take enough time to get it right the first time...
What makes you think that you have time to fix it?
_______________________________________________________________
If you did not take enough time to get it right the first time...
What makes you think that you have time to fix it?
The Programming requires Call-By-Call Capability.
How depends on whether you have an NSU or an Embedded PRI.
Assuming Embedded and the Call-by Call is inactive.
This can be confirmed by checking your Modified Digit table.
If you are inserting 1-3 digits (typically {000}) then Call by call is active. If you are not inserting digits then it is not active.
In the outgoing call characteristics of the embedded PRI you will find a form for Calling Line ID. There is a radio button to select Call-by Call.
Caution: Once enabled, all O/G Calls will fail until you insert a digit via the modified digit table.
As soon as you turn it on be prepared to modify all of your active digit Mod tables and insert the following 3 characters exactly as shown {0}.
The brackets prevent the digit from appearing in the SMDR record. The zero selects Caller ID ON.
Now setup an alternate ARS dialing method (*67 for eg.) to select a different modify Digit table that will insert {1}. The 1 will b;ock caller ID.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
How depends on whether you have an NSU or an Embedded PRI.
Assuming Embedded and the Call-by Call is inactive.
This can be confirmed by checking your Modified Digit table.
If you are inserting 1-3 digits (typically {000}) then Call by call is active. If you are not inserting digits then it is not active.
In the outgoing call characteristics of the embedded PRI you will find a form for Calling Line ID. There is a radio button to select Call-by Call.
Caution: Once enabled, all O/G Calls will fail until you insert a digit via the modified digit table.
As soon as you turn it on be prepared to modify all of your active digit Mod tables and insert the following 3 characters exactly as shown {0}.
The brackets prevent the digit from appearing in the SMDR record. The zero selects Caller ID ON.
Now setup an alternate ARS dialing method (*67 for eg.) to select a different modify Digit table that will insert {1}. The 1 will b;ock caller ID.
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
- Status
Similar threads
- Locked
- Question
