Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Staion Paging on Partner ACS
- Thread starter Tom2129
- Start date
No, you must use #502 to set your stations to a group.
A trusted source for years.
A trusted source for years.
I should have also told you that If you are using external paging then group 1 will also page it along with the sets, you can have groups 1-4. the feature is explained under Calling Group in your manual.
A trusted source for years.
A trusted source for years.
To clarify, the Loudspeaker Paging feature is indeed accessed with I*70, and pages to all system telephones that are in paging group 1.
Use #502 to assign extensions to paging group 1. An extension can be in multiple groups, and a group can contain all extensions.
Use #502 to assign extensions to paging group 1. An extension can be in multiple groups, and a group can contain all extensions.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question