Stacking more then 4 3300MM/XM

[Fires28]

Currently we have a single 3300MM switch with 3 3300XM switches hooked in via matrix cables. We are just about out of ports. Is there any way to add additional switches into this stack? Or do we need to rethink our whole network switch setup.

 

[tech888]

I also have a stack of 4 3300 switches stacked together with matrix cables. to add another switch you would have to use a cross over cable to one of the switches on the stack or you can use 4 port trunking for 800Mbs connection between the new switch and and stack.

 

[tech888]

I am pretty sure you can't add another switch to this stack. (as you were treating it as one identity, managed with 1 IP adress)